Products Category
 Agriculture Implements
     Portable Bag Closing Machines
 Electronics Instruments
 Fiber Models
     Measuring Cylinder
     Glass Distillation Kits
 Laboratory Glassware
 Laminar Air Flow
 Mathematic Kits
 Science Kits
 Surgical Items
 Water Baths

Double wall construction, inner being made out of highly polished thick stainless steel and outer made out of thick mild steel sheet finished in stoving white enamel paint or staple mat colour combinations. The gap is filled with special glass wool for temp. insulation. The bath is provided with the drain cock to easily drainout the water and clean the chamber when required. A pyramidal shaped cover is provided.

Immersion type heating elements are fitted at bottom. Temp. range  5o C above ambient to 80o C with accuracy + 0.5oC to 1oC is controlled by capillary thermostat regulated by a graduated knob on the panel, which is also provided with pilot lamp etc.

The equipment is workable on 220V AC 50Hz single phase.  The baths are supplied without racks, thermometer and stirring arrangement.


Size inside Chamber (Stainless Steel)   Capacity (Approx).

a. 300x175x175mm  (Suitable for 1 racks)                  12ltrs.
b. 300x250x175mm  (Suitable for 2 racks)                  14ltrs.
c. 375x300x175mm  (Suitable for 4 racks)                  18ltrs.
d. 475x300x175mm  (Suitable for 6 racks )                 25ltrs.
e. 605x300x175mm  (Suitable for 8 racks )                 32ltrs.

Optional :-

i)Imported Thermostat “EGO”/”JUMO” German with the accuracy of ±0.5°C.
ii)Digital temp. Indicator –cum – Controller.
iii)Microprocessor PID Digital temp. Indicator- cum- controller.
iv)Digital temp. Indicator.

WATER BATH RECTANGULAR (DOUBLE wall) (Thermostatic Control )
Standard double wall construction, inner being of stainless steel outer of m.s. duly stoving paint finish and gap filled for temp. insulation with glass wool. Top cover with 75 mm (3") holes with concentric rings. Temp. range 5oC above ambient to 95oC type element with accuracy of  +  1oC. Supplied complete with  plug & cord. 

Panel provided with pilot lamps, thermostat control knob etc.

Size inside (Stainless Steel)                           Capacity Approx.

a) 300x250x100mm  6  holes of 75mm dia .             8ltrs.
b) 355x405x100mm 12 holes of 75mm dia.             15 ltrs.




  • Imported thermostat “EGO”/ “JUMO”  German with the accuracy of ±0.5°C.

  • Digital temp. Indicator- Cum –Controller.

  • Microprocessor PID Digital temp. Indicator-Cum –Controller.

  • Digital Temp. Indicator.


Body made out of thick stainless steel, top made out of chrome plated  sheet concentric rings to cover 3" dia holes are provided. Heating elements have an automatic cut-off device which operates when the bath gets dried.  

Equipment working on 220V AC 50Hz single phase.

Six inside (Stainless Steel)               Capacity (Approx.)

a. 300x250x100mm    6 holes of 75mm dia.      8ltrs.
b. 355x405x100mm   12 holes of 75mm dia.   15ltrs.

Construction as per model NU-110 but with glass windows on both opposite sides, for observation.  Temp. controlled by mercury contact thermometer with a sensitivity of 0.2oC.Suitable for precision laboratory activities requiring constant temp. with high degree of accuracy.  Complete with stirrer with speed control regulator workable on 220V AC 50 Hz single phase but provided with cups & sleeves for glass tubes.

a.      4 Cups & 6 Sleeves .

b.      6 Cups & 8 Sleeves.c.      12 Cups & 14 Sleeves.


Suitable to spread wax section ribbons after microtomy to get wrinkle free specimen for staining.  Double wall round construction. Inner chamber black anodized aluminium and outer made out of mild steel sheet duly finished stoving white enamel paint.  

Inner chamber is single stainless piece to avoid chances of any leakage with enough wide rim for drying wet slides.  Temp. range 5oC above ambient to 70oC + 2oC.  immersion type heating elements attain the controlled temperature regulated by a capillary thermostat. 

Panel provided with thermo regulator knob, pilot lamp and is supplied with cord & plug.  Equipment workable on 220V AC 50 Hz single  phase.


     DIA              DEPTH

a. 200mm       x  75mm

b.250mm        x 125mm

Design and Specifications are Subject to change.
Prev 1  2   Next
Home About us Products Contact Us Enquiry